Radiography involves the use of penetrating Gamma or X-ray to examine parts for internal imperfections.
X-Ray & Gamma Radiography
The thickness measurement & internal flaws of a material can be examined by using Ultrasonic Testing....
Magnetic Particle Inspection is used to examine surface and near surface defects. Magnetic particle inspection...
Magnetic Particle Testing
Liquid penetrant testing is used to check for surface defects of a component .Test object are coated with dye...
Liquid Penetrant Testing
The objective of the Hardness Testing is to check for the effectiveness of Heat Treatment by evaluating the hardness of the material. Our Portable hardness...
Corrosion Mapping Provides precise thickness measurement and a virtual picture of the damage.
Corrosion Mapping (UT C-Scan & B-scan)
Phased array ultrasonic testing uses multiple elements to steer, focus and scan beams with a single transducer assembly.
Phased Array Ultrasonic Testing (P.A.U.T)
TOFD technique is a real time imaging system that produces a cross sectional view (D-Scan) of the material tested.
Time of flight Diffraction Ultrasonic Testing (T.O.F.D)
CFM is an electromagnetic testing capable of detecting and sizing surface – breaking cracks in metals.
Alternative Current Field Measurement (A.C.F.M)
Surface eddy current testing is for detecting and sizing surface defects in ferrous, non ferrous welds and steel structures.
Surface Eddy Current Testing (E.C.T)
Eddy current tube testing is a high speed & versatile method for the inspection of non ferrous tubing.
Eddy Current Tube Testing (E.C.T)
RVI tool(camera) was send through the small opening of the remote places and the internal images were sending ...
Remote Visual Inspection (R.V.I)
Our PMI XRF alloy analyzers are portable hand-held devices that perform a non-destructive test on the material at any time in merely seconds.
Positive Material Identification (P.M.I)
Ultrasonic thickness measurement (UTM) is a method of performing non-destructive measurement (gauging) of the local thickness ...
Ultrasonic Thickness Measurement (UTM)
Hull structure visual inspection is carry out to determine the defective area that are required to be renew and the overall condition of the vessel.
Hull Visual Inspection
Bottom Pit Inspection
When the schedule of the vessel is too tight for long schedule of inspection & repair in the shipyard.When the schedule of the vessel is too tight ......
A summary report on the inspection of hull structures including piping i.w.o tanks, outfitting, anodes condition nd coating condition will be submitted to the Ship Owners daily upon completion of the tank inspection...
Structure Condition Assessment
Rope access is a form of work positioning, initially developed from techniques used in climbing and caving,which applies practical rope-work to allow workers to access difficult-toreach locations..
Industrial and Commercial Rope Access
Inspecting Oil Country Tubular Goods (OCTG)
Dry & Reefer Container Repairs and Maintenance Services
Lifting and Hoisting & Lifting Equipment Inspection
50 Tuas Avenue 11 #03-05/06 Tuas Lot Singapore 639107
+65 6897 8119